WET LOOK GLOSS SEALER

High Gloss Solvent Bead Sealer • Brick • Manufactured Stone • Concrete • Exposed Aggregate • Unglazed Tile

(Interior and exterior use)

•

WET LOOK GLOSS

WET LOOK GLOSS is a clear sealer (solvent-based) and dust-proofer for concrete surface. It offers improved resistance to rain, the sun, freezing temperatures, stains and other pollutants that sometimes can be hazardous to concrete. WET LOOK GLOSS forms a superior moisture retentive film on concrete.

Recommended Use:

Wet look gloss is recommended for both interior and exterior newly placed or existing concrete, slate, brick, manufactured stone, sandstone, and other natural stones where a high gloss sealing compound is specified.

Application Process:

The sealer should only be applied to clean and dry surfaces. Sealer may be applied by brush, roller or spray. Spread evenly. Do not allow puddles or a heavy surface film to occur. One coat is sufficient for most surfaces. If a second coat is desired, wait 30-45mins. Apply full strength. Colored concrete may darken unevenly. Always test on a small area to see final effect.

Note - Application must not take place in inclement weather.

SEALER LITER

1/1

SEALER GALLON

1/1

BACK